urmet domus iPercom 1060 Installation And User Manual page 93

In addition, always regardless of the tab chosen, it is possible to:
• check whether a single device communicates with the Switchboard application via the button
(for the button to enable, you must select a device);
• check whether all devices communicate with the Switchboard application via the button
• restart the device using the button (for
• silence the auditory alert only of device not communicating correctly with the Switchboard
application using the button
After silencing the audible notification of a device not communicating correctly with the
Switchboard application, it no longer appears in the count of devices not communicating
correctly (red circle in the "Device status" tab).
The only notification that can be silenced is the incorrect communication one. Misalignment
notifications (of configuration or UPTK software development platform) cannot be silenced, since
for the proper operation of the system, the configuration and UPTK version of the devices must
necessarily be aligned.
The RTSP Cameras do not appear in the "Diagnostics" because they are not IPerCom devices.
The field with the magnifying glass
DS1060-121G
the button to enable, you must select a device);
(for the button to enable, you must select a device).
can be used to filter devices by name.
;
93