Connecting The Pc Where The Switchboard Application Is Installed To The Ipercom System; Moving The Switchboard Application From One Ipercom System To Another - urmet domus iPercom 1060 Installation And User Manual

8.5 C
ONNECTING THE
I
PERCOM SYSTEM
It is recommended to always make the connection between the IPerCom system network and the PC
(where the Switchboard application is installed) via a LAN cable and not via a Wi-Fi network.
8.6 M
OVING THE
If the PC where the Switchboard application is installed is moved from one system to another, follow the
steps below to ensure that the application receives the new configuration correctly:
• connect the PC (where the application is installed) to the new system (using the same network
interface);
• start the application;
• press the "Show Advanced" button, which is displayed in the login window;
• select the "System Configuration" item in the Advanced section;
• press the "Remove" button;
• wait for the application to restart and for it to acquire the new configuration.
The procedure ends correctly as soon as the login window appears again.
If you use another network interface to connect to the new system, the procedure remains the same
with the only difference that, at point 3, the "Show Advanced" button is the one displayed in the
window for selecting the new network interface.
DS1060-121G
PC
WHERE THE
S
WITCHBOARD APPLICATION FROM ONE
S
WITCHBOARD APPLICATION IS INSTALLED TO THE
IP C
ER OM SYSTEM TO ANOTHER
147