Maps - urmet domus iPercom 1060 Installation And User Manual

7.5 M
APS
IPerCom makes map function available on the Switchboard application. By means of a suitable graphic
representation of the previously created plant (where the various devices are positioned), these
functions can be used to:
1. navigate the topological structure (site, blocks, stairs, floors, and apartments) through "sensitive"
areas by clicking the mouse of your PC;
2. display which devices and apartments generated the various alarm signals or doors left open and
make emergency calls to the apartments (when permitted by the plant configuration);
3. reset the alarm signals;
4. open the plant doors (pedestrian and vehicle);
5. use the Watch&Talk and the Watch&Listen functions on the devices that allow it;
6. call or initiate a chat for devices that allow it;
7. activate the Relay Actuators outputs;
8. display the inputs of the Relay Actuators from which alarms were generated.
In APPENDIX A: Actions which can be performed on devices on the maps
actions that the switchboard operator can perform on the maps according to the various devices in the
IPerCom system.
DS1060-121G
there is a table showing the
105