urmet domus iPercom 1060 Installation And User Manual page 26

At this point, the indication below appears in call data area (7):
By pressing on the flashing icon , call data area (7) appears as shown below:
To call the apartment, the operator must press the button.
In this phase the calling station will be put on hold (call data area (7) and the call is forwarded to the
apartment the user wants to contact (call data area (8))
.
When the user answers from the apartment station, he/she enters in audio or audio-video
communication with the switchboard.
In this case, the call data area (8) shows the message Connected and the video image area (3) generally
shows a static image (in the lower right corner there is a small frame with the same video stream that
the user can see on the video door phone if the switchboard is equipped with a Webcam, otherwise a
still image is shown):
To connect the calling station to the user, simply press the button.
26 DS1060-121G