By pressing the right mouse button on the video stream of a camera, the icon
can be used to remove the previously selected RTSP camera via confirmation pop-up.
Once a display mode is defined, it is copied to the remaining display modes, possibly increasing the
display pages.
The buttons
and
camera and restore it to the previous size.
The button
allows you to close the RTSP cameras window.
All IPerCom calling stations are automatically displayed in the list of RTSP cameras if the RTSP
streaming settings have been configured correctly from configurator (see
manual for the installer
2 ways described previously, the streaming video is displayed only if a call is sent to an apartment
and in the subsequent conversation phase or if an auto on is made from an apartment station.
7.2.7
T
EXTMESSAGE
Clicking on item "Textmessage" from menu "Tools" or clicking on the related button
window opens:
DS1060-121G
allow you to respectively enlarge the video streaming of each individual
for further details). Once a calling station has been selected in one of the
Figure 79: textmessage window
appears: this icon
the system technical
, the following
83
Need help?
Do you have a question about the iPercom 1060 and is the answer not in the manual?