urmet domus iPercom 1060 Installation And User Manual page 169

Once the call forwarding function for the Switchboard application has been configured, it is of
fundamental importance not to do a new system configuration from scratch (even if the topology
is the same): if this were the case, the procedure seen above to associate the smartphone /tablet
to the Switchboard application needs to be repeated.
All the contacts created in the configurator on the topological path of Switchboard and with the
CallMe option selected appear inside the "Address book" button too. For further details, see
system technical manual for the
If there are several switchboards in the system, you can call them all simultaneously and
individually using the "Address book" button.
If the CallMe application calls more than one switchboard and one of these rejects the call, it is
also closed on the other switchboards and therefore also on the CallMe app. On the contrary, if
an apartment station or a calling station calls more than one switchboard and one of these
rejects the call, it is not terminated on the other switchboards.
Calls to apartments and switchboards are forwarded only if the Switchboard application
associated with the CallMe app is active on your PC. In the same way, to make the auto-on on the
calling stations, the Switchboard application must be active on your PC.
If the Switchboard application is placed on another topological node, it is not necessary to scan a
new QR code.
To remove the switchboard from the CallMe application, press the "Settings" ---> "My places"
buttons in sequence. At this point, press on the item that identifies the Switchboard application,
then on the "Manage this place" ---> "Delete" buttons and confirm with the "Delete" button.
Missed calls (from apartment station) and alarms are notified even if the call forwarding function
is not enabled.
DS1060-121G
installer.
the
169