urmet domus iPercom 1060 Installation And User Manual page 47

The "Active" tab displays the active alarms (not yet reset) on the plant, in detail the type of alarm and
the source that generated it. The following controls are displayed depending on the selected alarm:
Emergency Call
Watch&Talk /
Watch&List
Reset
The "Log" tab shows the following information (for any alarm):
• date and time when the alarm was received,
• date and time when the alarm was reset.
An example of a log related to a received and reset panic alarm is given below:
The "Export" button can be used to export the alarm history in csv format (this function is useful if there
are many received and reset alarms).
DS1060-121G
Activation of two-way communication between switchboard and
apartment station from which a panic alarm has been received.
Activation of auto-on (with monodirectional or bidirectional audio) on:
-) Call Module 1060/12-13-17-18-23 for tamper alarm, coercion alarm or
door forced;
-) Modular panel with 1060/48 for coercion alarm or door forced;
-) Entry Panel 1060/71-74-75-78 and Entry Panel 1060/21-33-34 for door
forced.
Delete the selected alarm.
Figure 36: log with a panic alarm received and reset
47