urmet domus iPercom 1060 Installation And User Manual page 17

A short description of every button or area follows below:
1. Switchboard status display
2. View call forwarding status on smartphone
3. Video picture area
4. Panel 1 end call button
5. Call transfer button
6. Panel 2 end call button
7. Panel 1 call data area
8. Panel 2 call data area
9. Drop-down menus
10. Call / answer button
11. Delete button
12. Hold/Resume call button
13. Repeat last number called by switchboard
button
14. Open pedestrian door button
15. Open gate button
16. Mute microphone button
17. Open/close switchboard panel button
The arrangement of buttons on the vertical bar can be changed, except for buttons 17, 18, 19, 20,
21, 22 and 30, whose position remains fixed. For further details, see paragraph
configuration. The button configuration shown above is the one displayed upon the first
application start-up: what follows refers to the unmodified button bar.
DS1060-121G
18. Alarm button (acustic warning and blinking in case
of alarms in progress)
19. Opened door button (acustic warning and blinking
if doors are left open)
20. Missed call list button (blinking in case of missed
calls)
21. Chat button (acustic warning and blinking in case of
incoming message which has not been read)
22. Diagnostic button (audible and flashing in case of
malfunctioning devices)
23. Address book button
24. Open door button
25. Activation button
26. Switchboard status button
27. Access control button
28. Switchboard service configuration button
29. Hide/show keyboard button
30. Close application button
31. Keypad
Button bar
17