Appendix E: Configuring Call Forwarding Function In Ipercom Systems In Ipercloud Mode - urmet domus iPercom 1060 Installation And User Manual

APPENDIX E: C IP C
ONFIGURING CALL FORWARDING FUNCTION IN ER OM
IP C
SYSTEMS IN ER LOUD MODE
The configuration of the call forwarding function in relation to the Switchboard application in IPerCom
systems in IPerCloud mode is like that reported in APPENDIX C: Configuring call forwarding function
with CallMe Manager application support.
Once the site (created by the installer) has been acquired in the CallMe Manager application by the
building manager, after assigning the licenses, it is sufficient to print the letters not only for the
IPerCloud apartments but also for the Switchboard application, positioning on the node appropriate
depending on the system topology.
For example, in the figure below you need to position yourself on the block node:
Figure 178: IPerCloud system with switchboard imported into CallMe Manager
182 DS1060-121G