Handset Configuration - urmet domus iPercom 1060 Installation And User Manual

7.3.8 H
ANDSET CONFIGURATION
This menu can be used to configure the Door phone 1060/41, if present. In detail, you can:
• configure the three buttons present on the base of the Door phone 1060/41, connected to the
PC where the Switchboard application was installed.
• silence the auditory alert in the presence of certain events (specified below).
Press the concerned item to open the following screen:
A specific action among those listed in the drop-down menus can be assigned to each button on the top
of the screen.
Press the "OK" button to confirm your choices.
The three buttons have no associated actions after the first installation of the Switchboard application.
At the bottom of the screen, you can mute the auditory alert associated with unread chat message
events, door left open and diagnostic alerts by selecting one of the respective items. Incoming call and
alarm events cannot be silenced.
DS1060-121G
Figure 92: intercom buttons configuration
103