Receiving A Call From A User And Forwarding It To Another User - urmet domus iPercom 1060 Installation And User Manual

6.6 R
ECEIVING A CALL FROM A USER AND FORWARDING IT TO ANOTHER USER
If a user calls the switchboard and this is not in stand by mode, Switchboard application shows the
following information:
• Call data area (7) shows the name of the caller (name of the apartment station preceded by
the name of the node where it is placed):
• The answer button (10)
The operator can establish an audio or audio-video connection with the user clicking on the answer
button (10) (if a headset is used) or picking up the handset of Door phone 1060/41 (in this case
answer button icon is frozen and does not blink).
To forward the call to a second user, the operator must operate as follows:
• Select the second call data area (8);
• Enter the code of the desired user and click on button
book (see paragraph
At this stage the calling user will be placed on hold
When the user answers from his/her apartment station, he/she enters in audio or audio-video
communication with the switchboard.
In this case, the call data area (8) shows the message Connected and the image area shows the same
image that the user can see on the video door phone video door phone (if the switchboard is equipped
with a webcam, otherwise a static image is shown):
DS1060-121G
becomes green and starts blinking;
Call to a user with the address
:
or select the name from address
book) and click on button ;
39