Switchboard In Stand By Mode; Switchboard In Night Mode - urmet domus iPercom 1060 Installation And User Manual

5.1 S
WITCHBOARD IN STAND BY MODE
This mode is shown with icon
it were not present in the system. In detail:
• Calls coming from calling stations to apartment stations are directly addressed to users (they are
not intercepted by switchboard);
• Calls from apartment or calling stations to the switchboard: are not sent;
• Calls from the switchboard to apartment stations: are sent.
If a switchboard is in stand by mode, it is possible to divert calls to another switchboard. For
further details, see paragraph
Warnings for alarm, door left opened, missed calls, chat messages are disabled in this status.
When the switchboard returns to day or night status, alarms or door left opened warnings
(generated when the switchboard was in stand by) are then reported.
5.2 S
WITCHBOARD IN NIGHT MODE
This mode is shown with icon
inhibited and calls from calling stations are sent directly to users. In detail:
• Calls coming from calling stations to apartment stations are directly addressed to users (they are
not intercepted by switchboard);
• Direct calls from calling or apartment stations to the switchboard: are sent;
• Calls from switchboard to apartment stations: are sent.
DS1060-121G
in switchboard status display area (1): the switchboard behaves as if
Concierge Service Configuration.
in switchboard status display area (1): the concierge service is
19