urmet domus iPercom 1060 Installation And User Manual page 61

A
LARMS
The "Alarms" event category includes all the alarms generated by IPerCom system. In detail, it shows
which device has generated a specific alarm, which switchboard has taken charge of the alarm and
which switchboard has reset it. The name of each device is preceded by the name of the topological
node where the same device was placed. An example is shown below:
Figure 53: "Alarms" event category
O
THER
The event category "Other" includes other events that do not fall into the above categories. In detail, it
includes events related to the Lift Interface, log in and log out events from the Switchboard application,
MAC address of the device from which a system configuration change or installer password change has
been made.
Figure 54: "Other" event category
Each event category can be further filtered by means of the Advanced Filters section, where a drop-
down menu shows the various event categories reported before: according to the event category
selected, a further filter is shown, as explained in more detail below.
DS1060-121G 61