urmet domus iPercom 1060 Installation And User Manual page 14

Press instead the "Show Advanced" button to open the following screen:
Select the items shown in the figure to remove the following in order:
• system configuration;
• map configuration;
• local configuration;
• alarms log.
Press the "Remove" button to complete removal.
In detail, removing the system configuration is useful if the PC (on which the Switchboard application is
installed) is moved from one IPerCom system to another. Deleting the configuration will restart the
application. The steps to follow are illustrated in paragraph
one IPerCom system to
Removing the map configuration concerns all map-related operations (importing planimetries,
positioning devices, and drawing "sensitive" areas). For more details on maps, see the section Maps.
Removing the local configuration concerns all the local settings of the application (button bar
configuration, switchboard status and other), which are not properly connected to IPerCom system.
Removing the alarms log concerns the deletion of data related to the receive and reset of alarms (for
further details on alarms see the paragraph on Alarms).
14
Figure 12: advanced options
another.
Moving the Switchboard application from
DS1060-121G