Call To A User With Code - urmet domus iPercom 1060 Installation And User Manual

The button can be used to send a chat message to the chosen resident or apartment (the message
is sent to all video door phones in the apartment), for example, if the user does not reply or does not
want to be disturbed. Once the message has been sent, the button
conversation.
6.4 C
ALL TO A USER WITH CODE
If the user code (topological, logical, or numerical) to be called is known, operate as follows:
•
Select with mouse the call data area panel (7) o (8) from which calling;
•
Enter the user code on the keyboard;
To enter alphanumeric user codes, a keyboard connected to the PC is needed.
•
The entered code is shown in the call data area panel (7) or (8):
•
If a wrong character is entered, click on button C (11) to delete the last entered character;
•
After entering the code click on the button
DS1060-121G
Figure 18: call from switchboard to an apartment station
(10);
can be used to close the
27