Set The Pc Where The Switchboard Application Is Installed In "Sleep" Mode - urmet domus iPercom 1060 Installation And User Manual

8.7 S PC S " "
ET THE WHERE THE WITCHBOARD APPLICATION IS INSTALLED IN SLEEP MODE
If the Switchboard application is running on a PC, this must never be set in "sleep" mode by the relevant
button of your operating system:
Figure 140: button to set the PC in sleep mode
Otherwise, at the end of the "sleep" phase, the Switchboard application will no longer function
correctly. This malfunction does not occur if the "sleep" mode is set from the relevant configuration
page:
Figure 141: window to set the "sleep" mode after a period
148 DS1060-121G