Right Close Of Switchboard Application - urmet domus iPercom 1060 Installation And User Manual

The software versions shown in the figure refer to the software development platform version
included in the release software version.
The devices must be inserted in the configuration, so that the Switchboard application can report
any mismatches.
The message temporarily disappears when you press the "OK" button. However, all the devices in the
plant must be aligned with the same firmware version for the plant to work correctly.
8.2 R
IGHT CLOSE OF
It is recommended to close Switchboard application with lower left related button
• removing your own PC from the system, that is removing network cable that connects PC
IPerCom system;
• switching off PC.
DS1060-121G
S
WITCHBOARD APPLICATION
before:
139