Network Configuration - urmet domus iPercom 1060 Installation And User Manual

2.2 N C
ETWORK ONFIGURATION
At the first run of Switchboard application, the following window appears:
Figure 7: network interface selection
It is necessary to choose the MAC address of the network interface by which the PC is connected to the
IPerCom system.
To do this, press the "Open Network and Internet settings" item that appears by pressing the right
mouse button on the icon at the bottom right of your PC monitor. A screen opens with the list of
available networks. After pressing the related "Properties" button, the MAC address appears at the
bottom:
Figure 8: network interface MAC address
DS1060-121G 11