urmet domus iPercom 1060 Installation And User Manual page 187

If on the highest node there are several Switchboard applications (each with the call forwarding function
enabled), it is possible to establish through the configurator which CallMe app shall receive the call.
If there are 3 switchboards with the call forwarding function enabled on the "Block 1" node in the figure
above, the list of switchboards present on the topological node in question appears on the configuration
page of any of the 3 in the CallMe Priority section:
The list can be modified using the
"This Device" represents Switchboard 1, i.e. the Switchboard application whose configuration
page has been opened via the configurator.
The CallMe app associated with the first Switchboard application in the list (box in red) is the one that
will ring after a call to all switchboards. If you want another CallMe app to ring, you need to reorder the
list and put the Switchboard application connected to the CallMe app you want to ring in the first place.
In the event that not all Switchboard applications of the "Block 1" node are connected to the
CallMe app, the CallMe app that rings is the one relating to the first Switchboard application
found in the list and connected to the app.
DS1060-121G
Figure 183: list of switchboards on a topological node
and buttons.
187