Tools Menu; Concierge Service Configuration - urmet domus iPercom 1060 Installation And User Manual

7.2 T
OOLS MENU
7.2.1 C
ONCIERGE
Press "Concierge Service Config" item or the related
The 3 sections present in the screen are described below.
T
RANSFER IN STANDBY MODE
In this section it is possible to transfer the calls directed to a switchboard in stand-by status to another
switchboard available on the system. The switchboard in standby mode will not receive any calls.
To do the above it is necessary:
• check flag "Enabled",
• select from drop down menu another switchboard of the system,
• click on button
68
S C
ERVICE ONFIGURATION
Figure 64: concierge service configuration
to confirm the choices made before.
button to display the following screen:
DS1060-121G