Using The Switchboard Application With Door Phone 1060/41 - urmet domus iPercom 1060 Installation And User Manual

8.4 U S
SING THE
To make more immediate and easier management of all communications with visitors and system users,
it is suggested to connect an additional Door phone 1060/41 to the computer. In this case buttons
and are switchboardd by actions "Unhook handset" e "Hang up handset".
Button is disabled while the call is received.
On the contrary, button
For connection of the additional Door phone 1060/41, follow the instructions in the instruction manual
supplied with the product if your PC is equipped with a loudspeaker output and a microphone input.
If your PC has only one connector for microphone input and loudspeaker output, you need to use the
additional cable supplied with the product. The jack connector must be connected to your PC, while the
two RCA connectors must be connected to the corresponding RCA connectors of the door phone (green
to green and red to pink).
In both cases the Door phone 1060/41 does not require any driver installation: when you connect the
device to your PC using the USB cable, the installation starts automatically.
Connection of Door Phone 1060/41 on PC provided of only one input for microphone and speaker
could request configurations on audio card for the right working of the door phone. These
configurations can be different as a function of the PC in use or audio card supplied by the same
PC.
146
WITCHBOARD APPLICATION WITH
is enabled and the call can be closed also using this button.
D P 1060/41
OOR HONE
DS1060-121G