urmet domus iPercom 1060 Installation And User Manual page 185

If on the lowest node of the topological path of the calling device (or in those immediately above) there
are several Switchboard applications (each with the call forwarding function enabled), it is possible to
establish through the configurator which CallMe app should receive the call.
For example, if on the "Floor 1" node in the figure above there are 3 switchboards with the call
forwarding function enabled, the list of switchboards present on the topological node in question
appears on the configuration page of any of the 3 in the CallMe Priority section:
The list can be modified using the
"This Device" represents Switchboard 1, i.e. the Switchboard application whose configuration
page has been opened via the configurator.
The CallMe app associated with the first Switchboard application in the list (box in red) is the one that
will receive the call if the APT1 apartment calls the competence switchboards. If you want that another
CallMe app receives the call, you need to reorder the list and enter the Switchboard application
connected to the CallMe app that you want to ring in the first place.
DS1060-121G
Figure 181: list of switchboards on a topological node
and buttons.
185