Click on this item to clear the alarm as follows:
• the icon
• the alarm icon on the pedestrian door disappears,
The "Alarm reset - Forced door" menu item clears the alarm on the maps and on the
corresponding alarm window.
The above also applies to the coercion and tampering alarm with the appropriate alarm icons.
In
APPENDIX A: Actions which can be performed on devices on the maps
according to each device present on the system, the corresponding actions that the switchboard
operator can perform on the maps are shown.
The "Watch & Talk" and "Watch & Listen" items are always present on the gate icons and calling
station icons whether an alarm or door left opened signal is present or not.
DS1060-121G
stops flashing on the maps (if there are no other alarms in progress),
there is a table where,
129
Need help?
Do you have a question about the iPercom 1060 and is the answer not in the manual?