urmet domus iPercom 1060 Installation And User Manual page 62

C
ALLS EVENT
The following appears if you choose the "Calls" event type in the "Category" drop-down menu (default
setting):
Figure 55: "Calls" event category advanced filter
The calls can be filtered according to the calling device ("Source") and the called device ("Destination").
The source and destination are selected by pressing the button . It opens a screen through which you
can navigate the topological structure of the system and choose a calling station for the source, as
shown below:
Figure 56: choose of the calling device
The called device is selected in the same way.
After pressing the "OK" button and then the "Apply Filters" button, only calls between the devices
selected above for the Calls event category will be displayed.
62 DS1060-121G