Case 3: Automatic Network Settings (Previous Setting: Manual) - urmet domus iPercom 1060 Installation And User Manual

8.3.3 C 3:
ASE AUTOMATIC NETWORK SETTINGS
In this case Switchboard application must take in automatic way network settings: IP address, subnet
mask, default gateway and DNS server. Application shows the following pop-up window in 5 minutes,
after network settings was changed:
According to the image above:
• item "Required configuration" means that new network configuration has an automatic IP
addressing, that is a DHCP mode;
• item "Current configuration" means that previous network configuration had a manual IP
addressing, that is without DHCP.
In windows reported in paragraph
automatically" and "Obtain DNS server address automatically", after having changed network
addressing into automatic way.
144
(
PREVIOUS SETTING
Figure 138: from manual to automatic network configuration
8.3.1 it is necessary selecting items "Obtain an IP address
: )
MANUAL
DS1060-121G