Case 2: Manual Network Settings (Previous Setting: Manual) - urmet domus iPercom 1060 Installation And User Manual

8.3.2 C 2: M
ASE ANUAL NETWORK SETTINGS
It is necessary in this case setting manually Switchboard application network parameters: IP address,
subnet mask, default gateway and DNS server. Application shows the following pop up window in 5
minutes, after network settings was changed:
According to the image above:
• item "Required configuration" shows network parameters to set manually to Switchboard
application;
• item "Current configuration" means that previous network configuration had a manual IP
addressing, that is without DHCP.
To change network parameters, see previous paragraph.
DS1060-121G
(
PREVIOUS SETTING
Figure 137: manual network address change
: )
MANUAL
143