Flash Photography - Contax TVS DIGITAL Instruction Manual

Hide thumbs Also See for TVS DIGITAL:
Table of Contents

Advertisement

4. Flash Photography
The camera allows you to select the flash mode that you think best suits the Image or the scene.
In the P or Av exposure mode, use the
button to cycle through the different flash
modes shown on the display panel and the LCD monitor as shown below. Select the desired
flash mode.
I Auto flash mode
Red-eye reduction auto flash mode ->
Flash-off mode
rC' Fill-in flash mode
Cs! Night portrait flash mode
0 Auto flash mode
^ AUTO
1
0 Night portrait flash mode
^ AUTO
<S>*A
T
^ AUTO
<5>
^
0 Red-eye
reduction auto
flash mode
0 Flash-off mode
0 Fill-in flash mode
<1. Auto Flash Mode>
AUTO"
The camera is automatically set to flash exposure mode when the scene Is so dark that a shutter
speed lower than 1/60 sec is required. The shutter speed is then set to 1/60 sec.
A AUTO
<2. Red-eye Reduction Auto Flash Mod6>
"
This mode reduces the red-eye effect that a flash can sometimes cause in photos of people.
• In this mode, two flashes are tired with a 0.8 second interval between them. The shutter Is released when the
second flash is fired. Be sure not to move the camera or let the subject move after the first flash is tired.
<3. Flash-off Mode> "(J)"
Use this mode when you want to capture the mood a subject conveys at dusk or In a room and you
do not want the flash to fire. This mode provides a natural image since exposure is determined by
the light on the subject.
• Shooting in dark places requires a slow shutter speed (up to 1 sec) and use of a tripod is recommended to
prevent camera shake.
34

Advertisement

Table of Contents
loading

Table of Contents