Viewfinder Display And Display Panel.12 - Contax TVS DIGITAL Instruction Manual

Viewfinder Display and Display Panel
Viewfinder Display
Shooting aiea —
C>ase-uo area'i-'..
StanclQy LED {GrMnl
Wide feoua trama —
Qoae-up area
-Caution LED (Red)
Spot focua tiame
Wide focus and spot focus frame ('^ to 1.5 m)
These indications show tne focusing area. The wide focus frame is the default setting. Use the spot
focus frame to focus on specific subjects, (P4B)
• Use the LCD monitor to focus on suhiecfs that are 1 ,S m or closer.
Shooting area H to 1.5 m)
Tins area shows what you take during normal photography.
Close-up area (1.5 to 0.6 m)
This area shows the area of the subject that you capture during close-up photography. Use the
LC □ mailtor for macro photography.
Display Panel
In this diagram all icons ere shown or the diaoiay panel In acljal use.
the Icons that appear depend on made settings
Macro mode(Pai|
Flash modepas) -
MFmod9lP42| --
AFL icon|P40) —
Exposure
compwisalKjn
tP43)
Continuous shootlr^g |PS1|
Remaining exposure
ooumer(P30, Jty
Remaining movie
counter (P69!
Battery indicator IP1S1
- Long tlrrw moda IPS?)
12