Using The Eq Or Dynamics Libraries - Yamaha QL5 Reference Manual

2
Dynamics parameter area
This area displays the dynamics type and various meters. Press the area to access the
DYNAMICS 1ch window of that channel.
If DUCKING, EXPANDER, COMPANDER (-H/-S), or DE-ESSER has been selected as the
dynamics type, the type appears near the top of this area.
The lower part of this area displays meters that indicate the levels of signals after
dynamics processing, the GR meter, and the threshold (a numeric value). If the
dynamics processor is any type other than GATE, the threshold setting is indicated as a
vertical line.

Using the EQ or Dynamics libraries

You can use dedicated libraries to store and recall EQ and dynamics settings. For details on
using the EQ and dynamics libraries, refer to the "Using the libraries" section in the separate
Owner's Manual.
EQ library
There is an "INPUT EQ LIBRARY" that lets you store/recall EQ
settings for input channels, and an "OUTPUT EQ LIBRARY" that
lets you store and recall EQ settings for output channels.
To recall settings from a library, press the LIBRARY tool button in
the/HPF/EQ window.
NOTE
You can recall 199 different settings from both the input EQ library and output EQ library. Forty
(40) of the input library items are read-only presets, and three (3) of the output library items are
read-only presets.
Dynamics library
Use the "Dynamics Library" to store and recall dynamics settings. All of the dynamics
processors on QL series units use this dynamics library. (However, the available types will
differ between an input channel's Dynamics 1 and Dynamics 2, and an output channel's
Dynamics 1. You cannot recall a type that cannot be selected.)
To recall an item from the dynamics library, press the LIBRARY tool button in the DYNAMICS
1/2 window.
NOTE
You can recall 199 different settings from the library. Forty-one (41) of these are read-only
presets.
LIBRARY button
55
EQ and Dynamics
Reference Manual