Using The Tool Buttons; About The Tool Buttons; Using Libraries - Yamaha M7CL Owner's Manual

In some popup windows, the title bar at the top of the window contains tool buttons for additional
functions. You can use these buttons to access related libraries or copy parameters from one
channel to another channel. This section explains how to use the tool buttons.

About the tool buttons

In the ATT/HPF/EQ, DYNAMICS 1/2, GEQ, and
EFFECT popup windows, the following tool buttons are
shown.
1 2 3
1 LIBRARY button
This button opens the library associated with the current
popup window (EQ, dynamics, GEQ, or effect libraries).
B
DEFAULT button
This button returns the currently selected channel (EQ/
dynamics) or rack (effect) to its default state.
C
COPY button
This button copies the settings of the currently selected
channel (EQ/dynamics) or rack (GEQ/effect). The copied
content is held in a buffer memory (a temporary memory
area).
D
PASTE button
This button pastes the settings from the buffer memory to
the currently selected channel (EQ/dynamics) or rack
(GEQ/effect).
E
COMPARE button
This button exchanges and compares the settings in the
buffer memory with the settings of the currently selected
channel (EQ/dynamics) or rack (GEQ/effect).
For some windows, the following tool buttons are also
shown.
• SET ALL ........ Sets all parameters in the window.
• CLEAR ALL... Clears all parameters in the window.
• ALL PRE........ Specifies PRE as the position from
which all signals are sent to the speci-
fied bus.
• ALL POST ..... Specifies POST as the position from
which all signals are sent to the speci-
fied bus.

Using the tool buttons

This section explains basic operations for libraries. Librar-
ies allow you to store and recall settings for the currently
selected channel (EQ/dynamics) or rack (GEQ/effect).
4 5
The following libraries are provided.
The method of operation is essentially the same for each
library.
● Recalling settings from a library
1

Using libraries

• Input EQ library
• Output EQ library
• Dynamics library
• GEQ library
• Effect library
Open a popup window that provides the
tool buttons.
To access each popup window, proceed as follows.
[ATT/HPF/EQ popup window]
[DYNAMICS 1/2 popup window]
In the SELECTED CHANNEL VIEW screen or the
OVERVIEW screen, press the appropriate field for EQ
or Dynamics 1/2.
1 EQ graph field
B
Dynamics 1/2 field
Using the tool buttons
2
1
31
M7CL Owner's Manual
3