Gate Library Screen - Yamaha DSP5D Owner's Manual

INPUT GATE/COMP function

GATE LIBRARY screen

Here you can recall, store, rename, or delete items in the
gate library.
1
2
3
A EDIT
When you click this button, the GATE PARAM screen
for the currently selected input channel will appear.
B Channel selection
Select the input channel that you want to edit. The
name of the channel is displayed at the right.
C Gate graph of the selected channel
This graph shows the approximate response of the gate
for the currently selected channel.
D Level meters
These meters show the amount of gain reduction (GR),
and the peak levels before the gate (PRE) and after the
gate (POST). If the signal clips, the OVER segment will
light.
294
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
GATE LIBRARY
4
Reference section
5
6
7
8
E RECALL
Recalls the gate library item selected in the list into
memory.
F STORE
Stores the gate settings of the currently selected chan-
nel into the location selected in the list. When you click
this button a window will appear, allowing you to
name and save the settings.
G TITLE EDIT
Edits the title of the library item selected in the list.
When you click this button a window will appear,
allowing you to edit the title.
H CLEAR
Deletes the library item selected in the list. When you
click this button, a confirmation message will appear.
Note
Library items with an "R" displayed in the right column of the
list are read-only. Read-only items cannot be stored,
renamed, or deleted.
I Library gate graph
This graph indicates the approximate response of the
gate library item selected in the list.
J Library list
Use the scroll bar to select the library item on which
you want to perform an operation. The selected library
item will move to the center, and will be highlighted.
9
J