External Output Connection Cables - Omron CQM1 Operation Manual

External Output Connection Cables

G730 Interface Unit
Master
Terminal screws: M3
(Optimum tightening
torque: 0.5 N • m)
G730 Remote Terminal
Slave
+ –
3-2 External Output Connection Cables
Recommended Cables
Locate transmission cables away from power cables and high-voltage cables
to eliminate the effects of noise.
G730 Interface Unit Ex-
pansion Master
+
–
Terminal screws: M3
(Optimum tightening
torque: 0.5 N • m)
Set as terminator.
The G730 Interface Unit Master relay contact external outputs are the Trans-
mission Ready output and ALM output.
The external outputs can be connected using the following cable.
Cable: AWG22 to 18 (0.3 to 0.75 mm
G730 Interface Unit Ex-
pansion Master
*1
+
–
+
–
Terminal screws: M3
(Optimum tightening
torque: 0.5 N • m)
G730 Remote Terminal
Slave
+ –
Terminal screws: M3.5
(Optimum tightening torque: 0.8 N • m)
2
)
Section 3-2
*1
+
–
+
–
45