Omron CQM1 Operation Manual page 107

Nomenclature
2-1-2 Analog Power Supply Unit
CQM1-IPS01
Connector for the power supply
cable of the Analog Input Unit
Indicators
Cable Connections
!Caution Be sure to turn off the Analog Power Supply Unit before connecting or discon-
88
Indicators
Name
P/S (incorporated by
the CQM1-IPS01 only)
P/S1 (incorporated by
the CQM1-IPS02 only)
P/S2 (incorporated by
the CQM1-IPS02 only)
Note The P/S, P/S1, and P/S2 indicators are not lit when the power supply cable is
disconnected.
• Connect the power supply cable of the Analog Input Unit to the power
supply connector of the Analog Power Supply Unit and secure the power
supply cable connector with screws.
• The CQM1-IPS02 incorporates two power supply connectors. The power
supply cable of the Analog Input Unit can be connected to either one of
the power supply connectors.
necting the power supply cable of the Analog Input Unit. After connecting the
power supply cable, secure the power supply cable with the lock screws.
CQM1-IPS02
Connector 1 Connector 2
Connectors for the power supply
cable of the Analog Input Unit
Color
Green Lit when power is supplied to the Analog Input
Unit via the CQM1-IPS01.
Green Lit when power is supplied to the Analog Input
Unit via Connector 1 of the CQM1-IPS02.
Green Lit when power is supplied to the Analog Input
Unit via Connector 2 of the CQM1-IPS02.
Section 2-1
Indicators
Function