Programming Console Operation - Omron CQM1 Operation Manual

Programming Console Operation

5-2 Programming Console Operation
Initial Screen
1,2,3...
I/O Words
1,2,3...
Command
1,2,3...
Refer to the CQM1H Operation Manual (W363) or the CQM1 Operation Man-
ual (W226) for the detailed operating method of the Programming Console.
The operation of the Programming Console required for the initial settings is
explained below.
Operate the Programming Console as described below so that the default
screen of the Programming Console in program mode will appear.
1. Connect the Programming Console to the CQM1H/CQM1 CPU, set the
mode selector of the Programming Console to PROGRAM MODE, and
supply power to the Programming Console.
2. Input the password.
MONTR
CLR
3. The default screen will appear.
The contents of the I/O words will appear on the screen of the Programming
Console. When measured mode is selected for data input, the present binary-
coded scaled conversion data will appear under the input word display.
1. The input word (word 001 in this example) will be displayed.
A A
CH
0
SHIFT *
2. The output word (word 100 in this example) will be displayed.
A
B
CH
1
*
SHIFT
The command codes can be set to output word. In this example, descriptions
are given for the operation mode A.
1. The command code is set to the output word. The response for the com-
mand will appear under the input word display.
C
C
A
2
SHIFT
CHG
<Program>
Password
<Program>
CLR
?
B
0 1
MONTR
Output word Input word
? ?
A
0 0
MONTR
A
A
0 0
0
WRITE
? ?
+ +
Section 5-2
199