About This Manual - Omron CQM1 Operation Manual

About this Manual:

This manual describes the installation and operation of the CQM1H/CQM1-series Dedicated I/O Units
and includes the parts and sections described below. The CQM1H/CQM1-series Dedicated I/O Units
consist of the Units listed below.
Please read this manual carefully and be sure you understand the information provided before
attempting to install and operate the CQM1H/CQM1-series Dedicated I/O Units.
Part I: B7A Interface Units
Section 1 describes the general features, system configuration, and word allocation of the B7A Inter-
face Units.
Section 2 provides the nomenclature and switch settings for the B7A Interface Units.
Section 3 describes the connections between the B7A Interface Units and B7A Link Terminals.
The Appendix provides the specifications for the Units.
Part II: G730 Interface Units
Section 1 describes the general features, system configuration, and word allocation of the G730 Inter-
face Units.
Section 2 provides the nomenclature and switch settings for the G730 Interface Units.
Section 3 describes the connections between the G730 Interface Units and G730 Remote Terminals.
Section 4 provides the operational procedures for the G730 Interface Unit.
The Appendices provide the specifications, dimensions, and troubleshooting procedure for the Units.
Part III: I/O Link Unit
Section 1 describes the general features, system configuration, and word allocation of the CQM1-
LK501 I/O Link Unit.
Section 2 provides the nomenclature and switch settings for the CQM1-LK501 I/O Link Unit.
Section 3 describes the SYSMAC BUS cable connections for the CQM1-LK501 I/O Link Unit.
The Appendix provides the specifications for the Unit.
Part IV: Analog Input Unit and Analog Power Supply Units
Section 1 provides the features and system configuration relating to the Analog Input Unit and Analog
Power Supply Units.
Section 2 provides the nomenclature and functions of the Analog Input Unit and Analog Power Supply
Units.
Section 3 provides the operational procedures for the Analog Input Unit and Analog Power Supply
Units.
The Appendices provide the specifications, internal configuration, dimensions, and troubleshooting
procedure for the Units.
Part V: Analog Output Unit and Analog Power Supply Units
Section 1 provides the features and system configuration relating to the Analog Output Unit and Ana-
log Power Supply Units.
Section 2 provides the nomenclature and functions of the Analog Output Unit.
Section 3 provides the operational procedures for the Analog Output Unit.
The Appendices provide the specifications and troubleshooting procedures for the Units.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
xiii