Smartglide Kvm And Smartglide Kvm Focus - Extron electronics NAVigator User Manual

SmartGlide KVM and SmartGlide KVM Focus

A KVM workstation has two features available that simplify the workstation environment:
•
SmartGlide KVM switching – Provides the ability to easily switch USB ties between a group of inputs, by
moving the mouse from display to display.
NOTE: When SmartGlide KVM switching is enabled, selecting the same encoders across multiple
workstations is not
•
SmartGlide KVM focus – A grey, active border that shows on the workstation display. The border indicates
the current USB focus.
Enable one or both of these features as follows:
1. On the Workstation Configuration screen, click SmartGlide KVM Switching (see figure 89,
Figure 89. Selecting SmartGlide KVM and SmartGlide KVM Focus
NOTE: The KVM workstation must have two or more configured displays for Smart KVM switching to be
available for selection.
2. If desired, click SmartGlide KVM Focus (
3. Click SAVE ( ) to save the Smart KVM changes or CANCEL (
3
supported.
).
2
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
) to abandon them.
4
NAVigator System Manager • HTML Operation
).
1
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
88