Creating A Nav System - Extron electronics NAVigator User Manual

Creating a NAV System

Connection to the NAVigator can be done via the embedded HTML pages. Creating a NAV system using the
NAVigator and its embedded HTML pages is a seven-part process:
1. Connect to the NAVigator via the embedded HTML pages (see
page 9).
2. View and change NAVigator network settings as necessary (see
3. Discover and assign endpoints to the NAV system (see
page 31).
4. View and change endpoint network settings as necessary (see
communication settings
5. Configure the AV sources, displays, and other equipment. Once endpoint communication are established,
validate input/output signals via the Device Details pane of the endpoints.
6. Create and validate ties between the endpoints (see
7. Construct a control system using either Global Configurator or Global Scripter (see
page 128
on page 33).
Opening the Embedded HTML Pages
Network Connection Settings
Discover and Assign Encoders and Decoders
Configure Selected endpoint
Create NAV Ties
on page 35).
NAVigator System Manager • HTML Operation
on
on page 29).
on
Control System on
28