Input Tab - Extron electronics NAVigator User Manual

System manager
Hide thumbs Also See for NAVigator:
Table of Contents

Advertisement

INPUT tab

NOTE: The Input procedures that follow assume that you already have the GENERAL tab displayed on the
Configure Endpoints tools (see the
9 9 9 9
9 9 9 9 9 9
9 9 9 9 9 9 9 9
Figure 45.
Endpoints Page,
Configure input settings
1. Click the INPUT tab (see figure 45,
2. Click the Audio Format drop-down list for all inputs (
between Auto Detect, HDMI, AES67, or Analog (non-wallplate encoders only).
3. If desired, select (click) or deselect the AES67 checkbox for one or more individual endpoints (
the AES67 audio stream.
4. Click AES67 Source for one or more individual endpoints (
Operation with AES67 Audio
5. If desired, select (click) or deselect the HDCP Authorized checkbox for all inputs (
individual endpoints (
NOTE: When HDCP Authorized is enabled (checked), the encoder informs the connected source that it
can accept HDCP signals and is HDCP compliant. When disabled, the encoder informs the connected
source that it is not HDCP compliant.
For sources requiring encryption, enable HDCP Authorized. If HDCP Authorized is disabled for sources
requiring encryption (for example, a Blu-ray player), the output is muted or a warning message is
displayed.
Some sources may encrypt their output even if the source material does not require HDCP encryption,
preventing content from being displayed on a non-HDCP compliant display. Disable HDCP Authorized
to allow the output of the scaler to remain unencrypted.
TIP:
After you make any change in steps 2 through 5, an asterisk (
that there are unsaved changes.
procedure
A A A A A A A A
A A A A
A A A A A A
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
6 6 6 6 6 6 6 6
6 6 6 6 6 6
6 6 6 6
7 7 7 7
7 7 7 7 7 7 7 7
7 7 7 7 7 7
Configure Tools — INPUT Tab
) to make changes to the endpoint settings.
1
on page 148).
).
7
on page 37).
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
) or for one or more individual endpoints (
2
) to select an AES67 audio source to stream (see
5
NAVigator System Manager • HTML Operation
8 8 8 8
8 8 8 8 8 8
8 8 8 8 8 8 8 8
4 4 4 4
4 4 4 4 4 4 4 4
4 4 4 4 4 4
5 5 5 5
5 5 5 5 5 5 5 5
5 5 5 5 5 5
4
) or for one or more
6
) appears in the tab to indicate
A
£ £ £ £
£ £ £ £ £ £ £ £
£ £ £ £ £ £
¢ ¢ ¢ ¢
¢ ¢ ¢ ¢ ¢ ¢ ¢ ¢
¢ ¢ ¢ ¢ ¢ ¢
) to select
3
) to receive
46

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NAVigator and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents