Extron electronics NAVigator User Manual page 97

Recalling KVM presets
Once you have created a KVM preset, you need to recall it in order for it to take affect (executing video, audio,
and USB ties for some or all of the decoders that support the workstation). Recall a preset as follows:
1. On the KVM WORKSTATIONS > Presets page, click the Presets tab (see figure 88,
Figure 88. Recalling a Preset
2. Click the desired Preset (
NOTE: The selected preset includes tools (
below).
3. Click Recall ( ) to recall the preset or Close Preview (
3
Renaming a preset
1. Click the pencil icon (see figure 88,
2. Type the new name in the Name field (see
3. Click the Check icon (
Editing a preset
1. Click the Menu icon (
figure 86 on page 85.
2. Perform Creating KVM presets
Deleting a preset
1. Click the Menu icon (
prompts you to confirm that you want to delete the preset.
2. Click to confirm or
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
).
2
).
A
1
) to save the name or X (
2
, at right) > Edit ( ). The window returns to a display similar to
1 2
on page 85.
, at right) > Delete (
1 2
to abandon the deletion.
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
and ) for renaming, editing, and deleting presets (see
A B
) to abandon the recall.
4
at right).
) to abandon it.
3
). The window
NAVigator System Manager • HTML Operation
).
1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
A A A A A A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B B
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
87