Discover And Assign Encoders And Decoders - Extron electronics NAVigator User Manual

Discover and Assign Encoders and Decoders

Discover and assign encoders and decoders (endpoints) to the NAV system as follows:
1. If necessary, click the Menu icon (see figure 31,
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Figure 31. Discover Endpoints
2. Click ENDPOINTS (
3. Click DISCOVER ENDPOINTS (
NOTE: If you are adding to an existing set of assigned endpoints, at this point the endpoints page shows
the existing endpoints and you click the DISCOVER link instead (see figure 32,
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 32.
Continue the discovery and assignment process as described in
).
2
). The Assign Endpoints page opens (see
3
Appearance of Endpoints Page when Adding to Existing Endpoints
).
1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
NAVigator System Manager • HTML Operation
figure 33 on page 32).
).
1
steps 4 and 5 on page 32.
31