Extron electronics NAVigator User Manual page 104

2. If necessary, click TOOLS > Device Tools (see
3. Click FIRMWARE (
3
4. Click SELECT FILE (
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 96. Open Dialog Box
5. Navigate to the folder where you saved the firmware upgrade file (see figure 96,
6. Click Open ( ). The Open dialog box closes and the Device Tools page returns to the top, with the selected
2
firmware file identified (see figure 97,
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Figure 97. Device Page with Firmware File Identified
7. Click UPDATE ( ).
2
The NAVigator page displays a sequence that reports the progress as it uploads the file (see figure 98,
updates the firmware (
NOTE: Do not unplug the NAVigator while the firmware is been upgraded.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 98. Firmware Upload Progress
When the NAVigator reboots, the connection to it is momentarily lost and after a few seconds, the browser
displays the home page Login dialog box (see
you must reconnect (see
).
). An Open dialog box opens (see figure 96).
4
).
1
), and then reboots (
2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Opening the Embedded HTML Pages
figure 95, on page 93).
2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
).
3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
figure 8 on page 10). To continue to operate the NAVigator,
on page 9).
NAVigator System Manager • HTML Operation
). Select the file.
1
1
94
),