Configuring The Mullions - Extron electronics NAVigator User Manual

NOTES:
• See the applicable decoder user guide, available at www.extron.com, for a detailed list of
available output resolutions and rates.
• The Total Resolution (
make changes on the Resolution drop-down list.
c. Click the Video Output Format drop-down list (see
available video output formats for all outputs in the canvas. Auto (if selected) follows the input format.
NOTE: The decoders change their color space, chroma sampling and quantization parameters for
compatibility with HDMI and DVI display devices.
d. Click the Color Bit Depth drop-down list (
Auto (if selected) communicates with the display to check its capabilities and sets the color bit depth
accordingly.
e. Click the HDCP Mode drop-down list (
Authentication for all outputs in the canvas.
NOTE:
• Follow Input mimics the HDCP encryption state of the connected source.
• Alway Encrypt maintains the HDCP encrypted state with the output display device to improve
system switching performance.
• Disable Authentication disables HDCP Authentication and encryption attempts with the
connected sink devices, making the display behave as a non-HDCP compliant.
f.
Click the Aspect Ratio drop-down list (
ratio of the input video) or Fill (scale the output to fill the connected display) for all outputs in the canvas.
6. Click SAVE (
) to save all changes or CANCEL (
9

Configuring the mullions

Configure all decoders in a canvas at once, so that they have the same settings, as follows:
1. If necessary, click the Menu icon ( , see
2. If necessary, click WINDOWALLS (see
3. If necessary, click the existing canvas to configure (
(see figure 78 on page 77).
) displays the resolution of the entire canvas and changes as you
B
figure
) to force all outputs in the canvas to 8-bit depth or Auto.
6
) to select between Follow Input, Always Encrypt, and Disable
7
) to select between Follow (no scaling, maintain the aspect
8
) to abandon them.
¢
figure 9,
on page 11).
1
figure 75, on page 73).
1
or
3 4
NAVigator System Manager • HTML Operation
77,
on page 75) to select among the
5
). The Canvas CONFIGURATION pane opens
76