Conflicted Endpoints pane
The Conflicted Endpoints pane (see
endpoints that have an assignment conflict within the system.
Figure 119 shows normal indication and the indication if an endpoint is conflicted. If an
endpoint is reported as conflicted, click LEARN MORE (
1 1 1 1 1 1
1 1 1 1
1 1 1 1 1 1 1 1
No Conflicted Endpoints Discovered
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
3 3 3 3 3 3 3 3
3 3 3 3 3 3
3 3 3 3
4 4 4 4 4 4
4 4 4 4 4 4 4 4
4 4 4 4
Figure 119. Identifying and Resolving an Endpoint Conflict
NOTE: A conflict exists when either of the following conditions is present:
• An endpoint indicates it is assigned to a NAVigator, but that NAVigator doesn't include this endpoint in its
list of assigned endpoints.
• A NAVigator lists an endpoint in its list of assigned endpoints, but that endpoint indicates that it is
unassigned.
To resolve system conflict, perform the following:
1. Click the All checkbox (
resolve.
2. Click Assign (
) to reassign the endpoint to this NAVigator or Unassign (
5
this NAVigator.
figure
117,
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
Conflicted Endpoint Discovered
) or individual endpoint checkboxes (
3
on page 109) shows the number, if any, of discovered
B
) to identity the conflicted endpoint (
1
) to select one or more endpoints to
4
NAVigator System Manager • HTML Operation
).
2
5 5 5 5
5 5 5 5 5 5 5 5
5 5 5 5 5 5
6 6 6 6
6 6 6 6 6 6 6 6
6 6 6 6 6 6
) to release the endpoint from
6
111
Need help?
Do you have a question about the NAVigator and is the answer not in the manual?
Questions and answers