Related Manuals for Extron electronics TouchLink TLP Pro 1220 Series
Summary of Contents for Extron electronics TouchLink TLP Pro 1220 Series
- Page 1 User Guide TouchLink Pro Touchpanels TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series TouchLink Pro Touchpanel Control Systems 68-2294-01 Rev. D 01 19...
- Page 2 Safety Instructions Istruzioni di sicurezza • Italiano Safety Instructions • English WARNING: This symbol, , when used on the product, is intended AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad to alert the user of the presence of uninsulated dangerous voltage avvertire l’utente della presenza di tensione non isolata pericolosa within the product’s enclosure that may present a risk of electric shock.
- Page 3 All trademarks mentioned in this guide are the properties of their respective owners. The following registered trademarks , registered service marks( ), and trademarks(™) are the property of RGB Systems, Inc. or Extron Electronics ® (see the current list of trademarks on the...
- Page 4 FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
- Page 5 Conventions Used in this Guide Notifications In this user guide, the following are used: WARNING: Potential risk of severe injury or death. AVERTISSEMENT : Risque potentiel de blessure grave ou de mort. CAUTION: Risk of minor personal injury. ATTENTION : Risque de blessure mineure. ATTENTION: •...
-
Page 7: Table Of Contents
Contents Introduction Configuration Software ............1 ........20 About the TLP Pro 1220, 1520, and 1720 Series ..1 Configuration Software ..........20 Features ..............2 Install GUI Designer, Global Configurator, Application Diagram ..........3 and Toolbelt ............21 Requirements ............3 Using the Software ..........22 Software .............3 TLP Pro 1220, 1520, and 1720 Series Hardware ............3... - Page 8 TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Contents viii...
-
Page 9: Introduction
Introduction This guide describes the function, installation, and operation of the following Extron Touchlink Pro Touchpanels: • TLP Pro 1220MG • TLP Pro 1220TG • TLP Pro 1520MG • TLP Pro 1520TG • TLP Pro 1720MG • TLP Pro 1720TG Unless otherwise stated, the terms “touchpanel” or “TLP Pro” refer to any of the six models. The touchpanels are ideal for any AV applications requiring large touchpanels with flexible mounting options and fully customizable interfaces. -
Page 10: Features
Features • Capacitive touchscreen with 16 million colors — 12.1 inch screen with 1280x800 resolution (TLP Pro 1220 series) • 15.6 inch screen with 1366x768 resolution (TLP Pro 1520 series) • 17.3 inch screen with 1920x1080 resolution (TLP Pro 1720 series) • • Faster processing and more memory — Allows for quicker configuration uploads and more storage for GUI pages. -
Page 11: Application Diagram
Application Diagram The application diagram below shows the TLP Pro 1220MG. The other touchpanels described in this user guide can be used in similar configurations. HDMI Laptop Tuner 1 2 3 Volume Display Tuner Channel Presets Power Injector Ethernet/Power Mute Mute Room Last... -
Page 12: Installation Overview
Installation Overview This section contains an overview of the installation process. Follow the links for a more detailed explanation of each step. Before starting, download and install the latest versions of the following software: GUI Designer — For designing layouts for Extron TouchLink Pro touchpanels and third …... - Page 13 Set up the touchpanels for network communication: Connect the PC that you are using for setup, the control processor, and the touchpanel … to the same Ethernet subnetwork. Use the Setup Menu (see page 13) or Toolbelt to set the DHCP status and, …...
-
Page 14: Panel Features
Panel Features This section describes: • TLP Pro 1220, 1520, and 1720 Series Front Panel Features • TLP Pro 1220, 1520, and 1720 Series Rear Panel Features TLP Pro 1220, 1520, and 1720 Series Front Panel Features Figure 2 shows the TLP Pro 1720MG and TLP Pro 1720TG front panels. The features of TLP Pro 1220MG and 1520MG models are very similar to the TLP Pro 1720MG and the features of TLP Pro 1220TG and 1520TG models are very similar to the TLP Pro 1720TG. - Page 15 Communication LED (see figure 2 on the previous page) — shows the configuration and connection status of the touchpanel: Unlit during normal operation (the touchpanel is configured and connected to an • IP Link Pro control processor). Blinks red if the touchpanel has been configured but is not connected to an IP Link Pro •...
-
Page 16: Tlp Pro 1220, 1520, And 1720 Series Rear Panel Features
TLP Pro 1220, 1520, and 1720 Series Rear Panel Features Figure 3 shows the TLP Pro 1720MG and TLP Pro 1720TG rear panels. The TLP Pro 1720TG is shown with the rear cover removed. The features of TLP Pro 1220MG and 1520MG models are very similar to the TLP Pro 1720MG and the features of TLP Pro 1220TG and 1520TG models are very similar to the TLP Pro 1720TG. - Page 17 These touchpanels can use either a 12 VDC desktop power supply or a Power over Ethernet power injector. The Extron PI 140 power injector is provided with the TLP Pro 1720 series touchpanels. Do not use a different power injector with these models. ATTENTION: •...
- Page 18 ATTENTION: • Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the end product. • Utilisez toujours une source d’alimentation fournie ou recommandée par Extron. L’utilisation d’une source d’alimentation non autorisée annule toute conformité...
- Page 19 ATTENTION: • Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the end product. • Utilisez toujours une source d’alimentation fournie ou recommandée par Extron. L’utilisation d’une source d’alimentation non autorisée annule toute conformité...
-
Page 20: Routing Cables (Tg Models)
Mounting notches (2) (MG models only) (see figure 3 on page 8) — lower these notches over the hooks at the top of the mounting frame (see Wall Mounting on page 25). Mounting screws (2) (MG models only) — for securing the bottom of the touchpanel to the mounting frame (see Wall Mounting). -
Page 21: Setup Menu
Setup Menu The TLP Pro 1220, 1520, and 1720 series touchpanels can be set up by using the on-screen setup menu. This section provides information about accessing the Setup menu and the six sub-menus: • Setup Menu • Status Screen •... -
Page 22: Status Screen
Status Screen Audio Input Advanced Exit Status Network Display Info Network Display IP Address: 192.168.254.251 Resolution: 1280x800 Model: TLP Pro 1220MG DHCP: GUI Project: 1280x800 Host Name: TLP-AB-CD-EF Sleep Timer: 5 Minutes Part Number: 60-1340-02 Firmware Version: 1.02.0001-b001 Audio Input Bootloader Version: 1.03.0000... - Page 23 Edit the Host Name by pressing that button. A keypad opens: Figure 8. Alphanumeric Keypad Use the keypad to enter a new name, which appears in the text box. Host Name • Use the backspace character ( ) to delete existing characters. •...
-
Page 24: Display Screen
If you have changed any of the values in the Network screen, the 0.0.0.10 background color of the button changes to blue. Press Apply apply the new values or press to return to the previous values Revert without saving the changes. The button returns to gray. If you have not made any changes, the buttons are unavailable for Apply... -
Page 25: Audio Screen
Audio Screen Status Network Display Audio Input Advanced Exit Master Click Sound HDMI Figure 11. Audio Screen On the screen, use the slider controls to adjust the , and Audio Master Click Sound HDMI volume settings. • The Master panel allows you to click on the appropriate icon to set whether the audio is heard through the speakers, headphones, or both. - Page 26 The upper panel shows read-only information about the input signal status. The green bar indicates whether the current input is HDMI or XTP. In figure 12, on the previous page, the input is HDMI. The XTP input status information is obtained from the last XTP input signal. The lower panel allows adjustments to the input configuration.
-
Page 27: Advanced Screen
Select the video input by pressing the appropriate button ( HDMI The EDID information is shown in a read-only panel. To adjust , or , press the appropriate button. A Brightness Contrast Detail Overscan small window opens to the right of the screen. For , and Brightness Contrast... -
Page 28: Configuration Software
Configuration Software This section of the user guide provides information about: • Configuration Software • Install GUI Designer, Global Configurator, and Toolbelt • TLP Pro 1220, 1520, and 1720 Series Web Page • Updating the Firmware Configuration Software Use Toolbelt to provide device information, firmware updates, and configuration of network settings, system utilities (reset, reboot), and user management (username and password) for TouchLink Pro devices. -
Page 29: Install Gui Designer, Global Configurator, And Toolbelt
Install GUI Designer, Global Configurator, and Toolbelt NOTE: Use GUI Designer and Global Configurator Plus and Professional to configure the TLP Pro touchpanel. GUI Designer, Global Configurator, and Toolbelt can be downloaded from www.extron.com. Select the Download tab ( Click the ) option in the sidebar at the left. -
Page 30: Using The Software
Using the Software GUI Designer Use the GUI Designer software to design the screen layout for the touchpanel. See the GUI Designer Help file for step-by-step instructions and more detailed information. Global Configurator Use the Global Configurator software to set up and configure the control processor and the touchpanel. -
Page 31: Updating The Firmware
Updating the Firmware Firmware for all the touchpanels can be upgraded using Toolbelt or the touchpanel web page. Before starting, consult your IT team and ensure that the touchpanel has a unique IP address. Downloading Firmware Power on a computer that is connected to the same network as the touchpanel. On the Extron website, click in the menu bar along the top of the page (see Download... -
Page 32: Mounting
Mounting This section outlines the various options for: • Mounting the TLP Pro 1220MG, 1520MG, and 1720MG Rack Mounting • Wall Mounting • • Mounting the TLP Pro 1220TG, 1520TG, and 1720TG Desktop Mounting • VESA Mounting • Mounting the TLP Pro 1220MG, 1520MG, and 1720MG Rack Mounting These touchpanels can be mounted in any standard 19-inch equipment rack, using the optional rack mounting kit. -
Page 33: Wall Mounting
Wall Mounting The touchpanels can be mounted into drywall. The diagram in this section shows the TLP Pro 1520MG. Mount the TLP Pro 1220MG and TLP Pro 1720MG in the same way. ATTENTION: • Do not install the TLP Pro 1220MG, the TLP Pro 1520MG, or the TLP Pro 1720MG in a fire resistant rated wall or partition assembly. - Page 34 Mounting with a wall box Hold the touchpanel at a slight angle. Mount the touchpanel over the two hooks on the mounting plate. Install BB 700M (optional). Add the mounting plate. Align with the wall box and mark holes for screws. Secure the mounting plate to the wall with screws (4).
- Page 35 Mounting without a wall box This procedure can be adapted to mount the touchpanel in furniture, such as a lectern. Download the cut-out template for your touchpanel from www.extron.com. Print it at 100% (no scaling). Use the template to mark the wall, cut the hole, and drill the four pilot holes. The size of the cut-out hole is 9.25 inches (23.50 cm) wide x 6.25 inches (15.88 cm) high for the TLP Pro 1220MG, 1520MG, and 1720MG.
-
Page 36: Mounting The Tlp Pro 1220Tg, 1520Tg, And 1720Tg
Mounting the TLP Pro 1220TG, 1520TG, and 1720TG Removing the Back and Base Covers Some of these procedures require the back and base covers to be removed. You must remove the back cover before you can remove the base cover. Figure 23. -
Page 37: Vesa Mounting
Drill two pilot holes into the desktop. Remove the cover of the touchpanel base. Insert two #10 flat-head wood screws (not provided) through the touchpanel and align them with the two pilot holes. Secure the touchpanel to the tabletop. Replace the cover to the base. Placement with a Kensington Security Lock Figure 25. -
Page 38: Reference Material
Reference Material This section describes: • Network Port Requirements and Licensed Third-Party Software Used by the Touchpanels • Reset Modes Network Port Requirements and Licensed Third-Party Software Used by the Touchpanels For information about network port requirements and licensed third-party software for the TLP Pro 1220, 1520, and 1720 series touchpanels, see the Pro Series Control Product Network Ports and Licenses Guide, which is available at www.extron.com. -
Page 39: Reset All Ip Settings
Reset All IP Settings This mode resets all IP settings to factory defaults. Activation To reset all IP settings: Hold down the button until the Reset LED blinks twice (once at 3 seconds and again Reset at 6 seconds). Release and press Reset momentarily (for <1 second) within 1 second. - Page 40 Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.