Operation With Aes67 Audio - Extron electronics NAVigator User Manual

Operation with AES67 Audio

You can tie an Extron AES67-capable device, such as a DMP 128 ProDSP Digital Matrix Processor, into the NAV
system. See the user guide for the applicable device to configure that device and also the Dante documentation.
®
Once you have configured the AES67 device, the device is displayed on the NAVigator Configuration
Configure Input settings, steps 2 through 4
Endpoints Input page. If you have AES67 enabled on the Input (See
on page 46), you can select a discovered AES67 source through the Source Selection field.
Figure 151 shows three AES67-enabled DMP streams displayed on the Source Selection pane.
Figure 151. AES67 Source Selection Pane
NAVigator System Manager • Reference Information 148