Kvm Workstations Page; Creating A Kvm Workstation - Extron electronics NAVigator User Manual

KVM WORKSTATIONS Page

Creating a KVM workstation is a multi-step process consisting of the following procedures:
1. Create a workstation and assign the USB focus (see "Creating a KVM workstation").
NOTE: See the following prerequisites:
• Encoders —
• Must be NAV 5nn models.
• USB device class filtering must be set to HID only (see
• Connect USB cable between host and endpoint.
• Decoders —
• Must have at least one NAV 5nn model.
• USB device class filtering must be set to HID only (see
• Displays — All must have the same maximum supported resolution.
• PC or other source — Sleep setting: Hibernate must not be used, disable if possible.
2. Create presets (see
inputs that is grouped together and are arranged in a specific workstation display layout.

Creating a KVM workstation

Create and configure a workstation as follows:
1. If necessary, click the Menu icon ( , see
2. If necessary, click KVM WORKSTATIONS (see figure 83,
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 83. Opening the Workstation Configuration Pane and Selecting a Workstation
3. Click among:
•
Add Workstation (
• An existing and complete workstation (
•
An incomplete workstation (
The Workstation CONFIGURATION pane opens (see
selected.
4. Click in the Workstation Name field (
the Workstation Configuration pane.
NOTE: After any change, an asterisk (
changes.
Creating KVM presets
figure 9,
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
, to create a new workstation)
2
3
, to complete a workstation)
4
) and enter a custom name for KVM workstation being configured in
1
) appears in the CONFIGURATION tab to indicate the unsaved
B
Configure the USB settings
Configure the USB
on page 85). A preset can recall a set of
on page 11).
1
).
1
, to make changes to a workstation)
figure 84 on page 82) with Output Assignment (
NAVigator System Manager • HTML Operation
on page 55).
settings).
)
A
81