Configure Selected Endpoint Communication Settings - Extron electronics NAVigator User Manual

Configure Selected Endpoint Communication Settings

NOTE: This section configures selected endpoint settings using bulk configuration (the most convenient
approach). See
Configure selected endpoint settings in bulk (all at once) as follows:
1. If necessary, click the Menu icon (see figure 34,
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Figure 34. Selecting Configure
2. If necessary, click ENDPOINTS (
TIPS: Find specific endpoints more easily as follows:
• Use the ID button and Filter and Sort drop-down lists as described in the
• Click in the Search field (
number contain those characters.
3. Click the All checkbox (
4. Click Configure (
page 34).
TIPS:
• Configure from File (
(see Backing up the system
• Click Unassign (
5. Click the GENERAL link (see
desired changes to the settings shown on the figures.
6. Click in one or more fields to be edited and make changes as necessary (see
figure 36,
).
2
Endpoints page on page 37 for detailed descriptions of configuring all endpoint settings.
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 B B B B B B B B B B B B B B B B B B
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
). The Endpoints page opens.
2
) and enter a few characters to show endpoints whose name or I/O
A
) or individual endpoint checkboxes (
3
). The Configure Endpoints page opens (see
5
) is used for cloning or replacing an endpoint. A system backup file
B
on page 96) is the file from which the endpoint is configured.
) to unassign an endpoint from the NAVigator.
C
figure 35,
1
).
1
C C C C C C C C C C C C C C C C C C
4
) or the NETWORK link (see
NAVigator System Manager • HTML Operation
D D D D D D D D D D D D D D D D D D
TIPS
on page 32.
).
figure 35 and figure 36, both on
figure 36,
) as necessary to make the
1
figure 35,
2
A A A A A A A A A A A A A A A A A A
and
33