Paradyne 9161 Reference Manual page 221

SNMP Cross-Reference
Table D-1. SNMP MIB to User Interface Command Cross-Reference (2 of 13)
User Interface Command
main/status/system Test Status:
Net/DSX-1 LLB Test Active
Net/DSX-1 PLB Test Active
Net/DSX-1 RLB Test Active
DCLB, Slot xx Port n
DTLB, Slot xx Port n
DTPLB, Slot xx Port n
Voice DLB, Slot xx Port n
Voice ALB, Slot xx Port n
Voice LLB, Slot xx Port n
Voice DRS, Slot xx Port n
Voice Quiet, Slot xx Port n
Forced Signal, Slot xx Port
Pttn Act, Network/DSX-1
Mon Pttn , Network/DSX-1
Pttn Act, Slot xx Port n
Mon Pttn , Slot xx Port n
Lamp Test Active
main/status/voice:
Call Progress
Trunk Condition CGA
main/status/cross_connect:
main/status/performance/network
Telco Current:
Current Interval Timer
ESF Error Events
ES
UAS
SES
BES
CSS
LOFC
Telco Intervals:
ES
UAS
SES
BES
CSS
LOFC
D-2
SNMP MIB Object
Read:
dsx1LineLoop from dsx1LoopbackConfig for interface
dsx1PayloadLoop from dsx1LoopbackConfig for interface
devDS1TestControl and rlb test for interface
devSyncPortTestControl and dclb test for interface
devSyncPortTestControl and dtlb test for interface
devSyncPortTestControl and plb test for interface
devVoiceTestAction and digitalLoopback test for interface
devVoiceTestAction and analogLoopback test for interface
devVoiceTestAction and lineLoopback test for interface
devVoiceTestAction and userDRSTone or networkDRSTone for
interface
devVoiceTestAction and userQuietTone or networkQuietTone for
interface
devVoiceTestAction and testRXBits, testTXBits, testTRLeads, or
testELeads for interface
devDS1TestControl and send[Pttn] for interface
devDS1TestControl and mon[Pttn] for interface
devSyncDataTestControl and send[Pttn] for interface
devSyncDataTestControl and mon[Pttn] for interface
devControlTestStatus
Fully supported by MIB objects (see test/port (voice) and
config/voice_port.
devVoiceStatusCallProgState
devVoiceStatusTrunkCondInCGA
fully supported by devCrossConnect
For the network interface, Read value in:
dsx1TimeElapsed
dsx1TelcoCurrentEvent
dsx1CurrentES
dsx1CurrentUAS
dsx1CurrentSES
dsx1CurrentBES
dsx1CurrentCSS
dsx1CurrentLOFC
Select interval number with dsx1IntervalNumber, Read value in:
dsx1IntervalES
dsx1IntervalUAS
dsx1IntervalSES
dsx1IntervalBES
dsx1IntervalCSS
Select interval number with devTelcoIntervalNumber, then
Read value in: devTelcoIntervalLOFC
September 1997 9161-A2-GH30-20