Limiting Telnet Access - Paradyne 9161 Reference Manual

Limiting Telnet Access

9161-A2-GH30-20
The T1 access unit provides the following methods for limiting access through a
Telnet session:
Disabling Telnet access completely.
Requiring a user login ID and password.
Assigning an access level for the port.
Procedure
To limit access through a Telnet Session:
1. Follow this menu selection sequence:
Main Menu Configuration
2. Select the desired configuration area and press Return.
Load Configuration From
Customer Configuration 1/Customer Configuration 2]
3. Follow this menu selection sequence, pressing Return after each selection:
Configuration Edit/Display
The Telnet/FTP Session Options screen appears.
4. Select and set the following configuration options, as appropriate.
To . . .
Disable Telnet
Require a user's login ID and
password
Assign an access level for all Telnet
sessions
5. Press Ctrl-a to switch to the screen function key area.
6. To save changes, select Save and press Return.
7. Select the configuration area where you want to save the changes to and
press Return.
Save Configuration To
Customer Configuration 1/Customer Configuration 2]
When Save is complete, Command Complete appears at the bottom of the
screen.
September 1997
[Current Configuration/
User Interface Telnet/FTP Session
Set the configuration option . . .
Telnet Session to Disable.
Telnet Login Required to Enable.
NOTE: User login ID and password
combinations must be defined.
Refer to Creating a Login
page 6-1.
Session Access Level to Level-1, Level-2,
or Level-3.
[Current Configuration/
Security
on
6-5