Security
Creating a Login
*
Security is enabled by the configuration options Login Required for the Communication Port, and Telnet Login
Required or FTP Login Required for a Telnet/FTP Session.
9161-A2-GH30-20
A login ID and password is required if security is enabled.* You can define up to
six logins (login ID/password combinations). Each login must be unique and have
a specified access level.
Procedure
To create a login:
1. Follow this menu selection sequence:
Main Menu
Control
2. Press Ctrl-a to switch to the screen function key area.
3. Select New and press Return.
4. Enter login ID, password, and security level information.
In the field . . .
Login ID
Password
Re-enter Password
Access Level
5. Press Ctrl-a to switch to the screen function key area.
6. To save login information, select Save and press Return.
When Save is complete, Command Complete appears in the message area
at the bottom of the screen. The cursor is repositioned at the Login ID field,
ready for another entry.
September 1997
Admin Login
Enter the . . .
ID of 1 to 10 characters.
Password from 1 to 10 characters.
Password again to verify that you entered the
correct password into the device.
Access level: 1, 2, or 3.
6
6-1